Devialet Expert 1000 Pro

GENERAL SPECIFICATIONS

Finish :
- Unique casing hand polished
- Bottom plate 100% pure copper for better thermal dissipation
Colour : Dark chrome finish
Dimensions : Length: 400mm | Width: 400mm | Height: 40mm
Weight :
- Master : 9.7Kg
- Companion : 9.5Kg
Installation : Horizontal or vertical installation with automatic tilt detection

PERFORMANCES

Power : 2x1000Wrms 6Ω
Signal-to-Noise ratio : 133dB
THD - 130W/6Ω : 0,00025% / -112dB
THD - 10W/6Ω : 0,0001% / -120dB
Output impedance : 0,001Ω
Damping factor : 8000
Bandwidth :
- DC-30kHz (-0.1dB)
- DC-95kHz (-3dB)
Phase :
- 0.2° at 20kHz
- 0.9° at 40kHz
Thermal distortion : Below measurement threshold
Technologies : ADHV2®, SAM®, AIR®, EVO®, DAC Magic Wire®, RAM®
Intelligence :
- 3 x SHARC 400 MHz DSP's
- 1 x 16 MHz RISC processor
- 4 x 40 MHz RISC processors
- 1 x 64 MHz RISC processor
Synchronisation : Up to 8 units

INPUTS / OUTPUTS

Wi-Fi :
- 2.4GHz 802.11 b/g/n Wi-Fi input for the Devialet AIR universal streamer
- Supported formats: 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
Ethernet RJ45 :
- RJ45 10/100 Mbps Ethernet input for the Devialet AIR universal streamer
- Supported formats: 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
USB :
- USB Audio 2.0 asynchronous input/output
- Supported formats:
  - 16-bit/44.1 kHz PCM to 32-bit/192 kHz PCM
  - DSD64 1bit/2.822400MHz and 1bit/3.072000MH
- Supported formats:
  - Very low latency
  - Bi-directionality for digitisation of the active source
S/PDIF TOSLINK optical connector : Supported formats : 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
3.5mm mini-jack S/PDIF optical + RS232 connector :
- Supported formats: 16-bit/44.1 kHz to 24-bit/96 kHz
- Device control via the bidirectional RS232 protocol up to 115200 bauds (documentation available via the configurator)
RCA 1 & RCA 2 connector (selected via the configurator) :
- 1 or 2 coaxial S/PDIF digital inputs
  - Supported formats:
    - 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
    - DSD64 1bit/2.822400MHz and 1bit/3.072000MHz
- 1 S/PDIF coaxial (RCA1) digital output
  - Supported formats: PCM 24bits/48kHz/96kHz/192kHz
  - Multi-room use and monitoring loop
- Pre-amplified analogue output
  - Fixed or variable volume
  - Output level up to 4 VRMS
  - Stereo/mono/left/right mixing
  - Active filtering available
  - WM8740 D/A convertor operating at 24 bits/192 kHz
  - Compatible with subwoofer, headphone amplifier, monitoring loop
  - May be activated / deactivated via remote control
RCA 3 & RCA 4 connectors (selected via the configurator) :
- Line-in stereo analogue input
  - 24-bit/96 kHz or 24-bit/192 kHz sampling
  - T.I. PCM4202 A/D convertor
  - Accepts voltages up to +/- 10V
  - Maximum recommended level: 4 VRMS
- Analog input stereo phono level
  - 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
  - T.I. PCM4202 A/D convertor
  - Accepts voltages up to +/- 100mV
  - Maximum recommended level: 15mVRMS
  - Advanced conversion stage
1 or 2 coaxial S/PDIF digital inputs
- Supported formats:
  - 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
  - DSD64 1bit/2.822400MHz and 1bit/3.072000MHz
Mini-jack 3.5mm : 3.5mm mini-jack trigger connector
Speaker output :
- 4mm banana plugs, stripped cables or fork connectors
- Adjustable from 30 WRMS to 1000 WRMS via the configurator
- Compatible with all speakers, from 1Ω to 16Ω
- Short-circuit protection
- Active filtering available
- Output impedance: 0.001Ω

PHONO STAGE

Type of supported cartridges: MM/MC
MM sensitivity from 1mVRMS to 15mVRMS
MC sensitivity from 100 μVRMS to 5000 μVRMS
256 combinations for the resistive/capacitive loading of the cartridge
Stereo/mono/left/right mixing
13 equalisation curves available
Specific menu for dynamic adjustment of all these settings

PREAMPLIFIER & MAIN DAC

Patented Magic Wire Digital / Analogue Converter, D/A T.I. PCM1792
Unique high-precision MasterClock with very low jitter: 2ps rms
Conversion of all inputs into 24-bit/192 kHz
Built-in DSD / PCM conversion
SAM profile via configurator allowing the precise adaptation of the sound signal to the specifications of your speakers
Available active filtering on all analogue outputs via configurator
Volume control in increments of 0.5 dB
Volume adjustment range: -97.5 dB to +30.0 dB
Bypass/pass-thru mode available input by input
Balance adjustment
Tone control: bass +/-18 dB, treble +/-18 dB with variable frequency cut-off via configurator

OMNIDIRECTIONAL RADIO REMOTE CONTROL

Chassis carved out of a single aluminium block
Dark chrome finish
Hand polishing, unique piece
Dimensions: 114mm x 114mm x 43mm (l, w, h)
Weight: 568g (without batteries)
Requires 2 AAA batteries (1.5V LR03), provided – service life of a set of batteries: 5 years
No pairing required
Ultra responsive, latency < 3ms

ELECTRICAL POWER SUPPLY

Universal 90-240Vac – 50/60Hz
Power cable provided adapted to the country
Patented single stage switching mode topology
High power level: 1200W continuous, 4000W peak
High output with power factor correction (PFC)
High resiliency to hazards potentially encountered on distribution networks : brownouts, quick transients, overloads
PLC Compatible